PowerPack Off Canvas Cart
No products in the cart.
100% Secure Checkout!
0.00 0

Acid Lime (RB07-HD)

TeckWrap offers new very gloss HD colors that give your vehicle a solid as well as shiny finish. Smooth one without any orange peel. The material is stretchable, and one can wrap every edge and recessed area easily. And the adhesive is safe without giving you any trouble when uninstall. The film has a PET protective layer, which helps avoid scratches during the install process (should be peeled off before heating), and a plastic liner makes the film’s surface more gloss and reflective.

685.00 Excl. btw/VAT

Artikel: RB07-HD -Acid Lime Categories , ,

Description

Specifications

Conformable polymeric material with stable color pigments. Suitable for full car wrapping (or any other smooth or curved surface).

The thickness of the film: 0.16mm
The thickness of film with release liner: 0.32mm

Note: Products that have “HD” letters in their SKU (product code) are with the plastic release liner (high-gloss films)

Type of film: High grade polymeric multilayered calendared vinyl film with air release channels

Colors: Fierce red, Passionate Purple, Acid lime, Coral Peach, Ocean Wave, Amber Brown, Crystal Silver, Columbia Blue, Sea Turquoise, Cerulean Blue, Ocean Green, Mexican pink, Kelly Green, Golden yellow

Width & Length: Standard roll size – 1.52m*18m (59.8″* 708,6″, 4.98ft*59ft, 1.66yd* 19,6yd)

Series: 190 series

Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry
001)

Storing period (shelf life): 2 years if stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place

Avg. indoor life: 4 years when followed rules of application and usage

Avg. outdoor life: 3 years when followed rules of application and use

Application: from +17°C to +25°C, usage from -55°C to +65°C

Dimensional stability: shrinkage less than 4%

Plastification: between 27%-35%

Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average)

Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 5, Pass; Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)°C BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)°C BPT, Exposure duration: 49h

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater

Application method: Standard methods for calendered films. No overstretching. Post heating

Post-heating temperature: 100°C

Cure time: 24 hours above 10°C

Aftercare: PH neutral, Avoid wax or solvents

Directional: No

Tools: soft squeegees with buffers

Important note: The images, colors, and finishes on the screen are approximate. For the real representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of color may occur. The film may scratch during the application or a day in and out use. The scratching of the film is not covered by the warranty.