The thickness of film: 0.11mm
The thickness of film with release liner: 0.27mm
Type of film: PET film with new air release channels
Series: 180 series
Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry
Release liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. (ISO 9001, ISO 140001, OHSAS 18001)
Storing period: 3 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place.
Indoor life: Up to 3 years when followed rules of application and use
Outdoor life: Up to 1-2 years when followed rules of application and use (Zone 1)
Application: from +17°С to +25°С, usage from -55°С to +65°С
Dimensional stability: shrinkage less than 0,20%
Plastification: between 23%-31%
Package: Roll width 122 cm, length 18 m, weight 13 kg
Designed for partial wrapping ONLY!
Important note: The images, colors, and finishes on screen are approximate. For the real representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of color may occur. One needs to handle metalized films with care as the appearance of the metalized layer could change upon crumpling, overstretching, too strong heating. The film may scratch during the application or a day in and out use. The scratching of the film is not covered by the warranty.
Сaution: Before purchasing and using, a customer shall determine the product’s suitability for its intended use and should have experience in wrapping metalized films. The current film has a limited warranty for outdoor use on horizontal surfaces – up to 1 year. Actual performance depends on exposure conditions such as high temperature and pollution. We recommend laminating chrome films. We recommend using a steam vacuum or IRR heater for installation. The dry application only. Chrome films (CHMxxE, HCHxxG, MCHxx) can leave up to 30% adhesive residue. We recommend not heat film during uninstallation. Please refer to the TeckWrap Installation Guide for additional information.